GFL-Y20IU-485-P Laser measurement distance｜Laser Ranging Sensor｜DADISICK

group name: GFL-Y Series

Min Order: 1 piece

brand name: DADISICK

model: GFL-Y Series｜GFL-Y20IU-485-P

Delivery clauses under the trade mode: CIP

update time: Thu, 21 Nov 2024 21:00:57 GMT

contact supplier

Paramtents

Output method： PNP+analog+RS485
Resolution： 1mm
Laser type: Red semiconductor laser Class II laser 655+10nm<1m
Voltage: 12V-24V DC
Current consumption: ≤50mA
Reaction time: 50-200ms

Packging & Delivery

Min Order1 piece

Briefing

Output method: PNP+analog+RS485
Resolution: 1mm
Laser type: red semiconductor laser Class II laser 655+10nm1m
Reaction time: 50-200ms
Measure distance: 0.1-20m

Detailed

Characteristics

GFL-Y series laser ranging sensor models comparison
Item	Model
NPN+analog+RS485	GFL-Y01IU-485-N	GFL-Y02IU-485-N	GFL-Y05IU-485-N
PNP+analog+RS485	GFL-Y01IU-485-P	GFL-Y02IU-485-P	GFL-Y05IU-485-P
Measure distance	0.1-1m	0.1-2m	0.1-5m

Models comparison
Item	Model
NPN+analog+RS485	GFL-Y10IU-485-N	GFL-Y20IU-485-N	GFL-Y50IU-485-N
PNP+analog+RS485	GFL-Y10IU-485-P	GFL-Y20IU-485-P	GFL-Y50IU-485-P
Measure distance	0.1-10m	0.1-20m	0.1-50m

Technical Parameters
Resolution		1mm
Measurement error		+(2mm+d*1/10,000)★
Laser type		Red semiconductor laser Class II laser 655+10nm<1mW
Voltage		12V-24VDC+10% pulsation P-P10%
Current consumption		≤50mA @24V
Control output		NPN or PNP open drain output Open drain collector transistor output Maximum current:50mA Applied voltage: less than 30V DC Residual voltage: less than 1.5V Leakage current: less than 0.1mA
Output action		Normally open/normally closed can be switched
Short circuit protection		Automatic recovery type
Analog voltage output		Output range: 0-5V (alarm: 5.2V) Output impedance: 100Ω
Analog current output		Output range: 4-20mA (alarm: 0mA) Output impedance: 300Ω max
Reaction time		50-200ms
External input		NPN contactless input
Protective structure		IP67
Operating temperature		-10C~+45℃ (be careful not to condense or freeze)
Storage temperature		-20℃~+60℃
Working humidity		35%~85%RH
Use ambient illumination		Incandescent lamp: light receiving surface illumination below 3000lux
Use elevation		Below 2000m
Cable		With 8-core composite cable 2m
Material		Aluminum parts
Quality		About 150g
★: Indicates the measurement distance. In harsh environments, such as when the sunlight is too strong, the ambient temperature fluctuates too much, and the reflective surface is dark, the measurement results will have larger errors. In this case, the use of a target reflective plate will be better.

DIMENSION

WIRING DIAGRAM

NPN/PNP switch output Wiring Method

RS485 Wiring Method

GFL-Y series Laser Ranging Sensor RS485 Wiring diagram

DOCUMENTS & DOWNLOADS

CATALOGUE

GFL-Y series Laser Ranging Sensor

User manual for GFL-Y series laser ranging sensors