GFL-Z400NM | Laser Ranging Sensor | DADISICK

group name: GFL-Z Series

Min Order: 1 piece

brand name: DADISICK

model: GFL-Z series | GFL-Z400NM

Delivery clauses under the trade mode: CIP

update time: Tue, 04 Nov 2025 14:59:58 GMT

contact supplier

Paramtents

Response time： Up to 1.5ms
Output type Analog
Measuring center distance 400mm
Measuring range ±200mm
Repeatability 400μm(Range: 200~400mm)/800μm(Range: 400~600mm)
Supply voltage 12~24V DC±10%, pulsation P-P10%

Packging & Delivery

Min Order1 piece

Briefing

Response time: up to 1.5ms
Output type: analog
Measuring center distance: 400mm
Measuring range: ±200mm

Detailed

Characteristics

Laser Ranging Sensor Measuring range specification
Species		Measuring center 30mm	Measuring center 50mm	Measuring center 100mm	Measuring center 200mm	Measuring center type 400mm
Model	NPN output		GFL-Z50N	GFL-Z100N	GFL-Z200N	GFL-Z400N
	Analog quantity output	GFL-Z30NM	GFL-Z50NM	GFL-Z100NM	GFL-Z200NM	GFL-Z400NM
	RS485 communication	GFL-Z30N-RS485	GFL-Z50N-RS485	GFL-Z100N-RS485	GFL-Z200N-RS485	GFL-Z400N-RS485
Measuring center distance		30mm	50mm	100mm	200mm	400mm
Measuring range		±5mm	±15mm	±35mm	±80mm	±200mm
Repeatability		10μm	30μm	70μm	200μm	400μm(Measuring distance200~400mm) 800μm(Measuring distance400~600mm)
Straightness		±0.1%F.S.			±0.2%F.S.	±0.2%F.S.(Measuring distance200~400mm) ±0.2%F.S.(Measuring distance400~600mm)
Temperature characteristic		0.03%F.S./℃
illuminant		Red semiconductor laser Class 2 Maximum output :1mW, light beam wavelength :655nm
Beam diameter		About φ50μm	About φ70μm	Aboutφ120μm	About φ300μm	About φ500μm
Supply voltage		12~24V DC±10%, pulsation P-P10%
Current consumption		Below 40mA (24V DC supply voltage), below 60mA (12VDC supply voltage)
Control output		<NPN output type > NPN open collector transistor ●Maximum inow current :50mA ●Applied voltage :30V DC below (control output -0∨) ●Residual voltage: less than 1.5V (inow current 50mA) ●Leakage current: below 0.1mA
Output action		ON in light/ON in non-light can be switched
Short circuit protection		Equipped (automatic recove type)
Analogoutput	Voltage analog output (When alert :+5.2V)	Output range :0 to 5V Output impedance100Ω	-	Output range:0~5V Output impedance: 100Ω	-	Output range:0~5V Output impedance: 100Ω
Analogoutput	Current analog output (Ale :0mA)	Output range :4 to 20mA Load impedance :300Ω or less	-	Output range :4 to 20mA Load impedance :300Ω or less	-	Output range :4 to 20mA Load impedance :300Ω or less

Mechanical parameters
Reaction time	1.5ms/5ms/10ms can be switched
External input	NPN No contact input Valid :0V to +12V DC Input impedance: about 10 kΩ
Protective construction	IP60
Degree of fouling	2
Operating ambient temperature	-10℃~+40℃(pay attention to do not condensation, icing), storage :-20℃~+60°C
Ambient humidity	35%~85%RH, storage :35%~85%RH
Use ambient light	Incandescent lamp: the illumination degree of the illuminated suace is less than 3000lx
Service level	Below 2000m
Cable	With 0.15mm 5-core composite cable 2m
Material	Body shell: aluminum casting front cover plate: propylene base
weight	Approx. 35g(without cable), Approx. 85g(with cable)
Applicable specification	Compliance with EMC directive
(Note): When the measurement conditions are not specied, the use conditions are as follows: power supply voltage :24V DC, ambient temperature :+20℃, reaction time :10ms, analog output value of the measurement center distance. Object Object: White paper.

DIMENSION

Accessory installation diagram

WIRING DIAGRAM

Wiring diagram

DOCUMENTS & DOWNLOADS

CATALOGUE

GFL-Z series laser displacement sensor

GFL-Z Series instructions

GFL-Z series.3D-STP