GFL-Z200NM | Laser Measurement Sensor | DADISICK

group name: GFL-Z Series

Min Order: 1 piece

brand name: DADISICK

model: GFL-Z series | GFL-Z200NM

Delivery clauses under the trade mode: CIP

update time: Sat, 23 Nov 2024 16:24:18 GMT

contact supplier

Paramtents

Response time： Up to 1.5ms
Output type Analog
Measuring center distance 200mm
Measuring range ±80mm
Repeatability 200μm
Supply voltage 12~24V DC±10%, pulsation P-P10%

Packging & Delivery

Min Order1 piece

Briefing

Response time: up to 1.5ms
Output type: analog
Measuring center distance: 200mm
Measuring range: ±80mm

Detailed

Characteristics

Application Fields

Laser Measurement Sensor Measuring range specification
Species		Measuring center 30mm	Measuring center 50mm	Measuring center 100mm	Measuring center 200mm	Measuring center type 400mm
Model	NPN output		GFL-Z50N	GFL-Z100N	GFL-Z200N	GFL-Z400N
	Analog quantity output	GFL-Z30NM	GFL-Z50NM	GFL-Z100NM	GFL-Z200NM	GFL-Z400NM
	RS485 communication	GFL-Z30N-RS485	GFL-Z50N-RS485	GFL-Z100N-RS485	GFL-Z200N-RS485	GFL-Z400N-RS485
Measuring center distance		30mm	50mm	100mm	200mm	400mm
Measuring range		±5mm	±15mm	±35mm	±80mm	±200mm
Repeatability		10μm	30μm	70μm	200μm	400μm(Measuring distance200~400mm) 800μm(Measuring distance400~600mm)
Straightness		±0.1%F.S.			±0.2%F.S.	±0.2%F.S.(Measuring distance200~400mm) ±0.2%F.S.(Measuring distance400~600mm)
Temperature characteristic		0.03%F.S./℃
illuminant		Red semiconductor laser Class 2 Maximum output :1mW, light beam wavelength :655nm
Beam diameter		About φ50μm	About φ70μm	Aboutφ120μm	About φ300μm	About φ500μm
Supply voltage		12~24V DC±10%, pulsation P-P10%
Current consumption		Below 40mA (24V DC supply voltage), below 60mA (12VDC supply voltage)
Control output		<NPN output type > NPN open collector transistor ●Maximum inow current :50mA ●Applied voltage :30V DC below (control output -0∨) ●Residual voltage: less than 1.5V (inow current 50mA) ●Leakage current: below 0.1mA
Output action		ON in light/ON in non-light can be switched
Short circuit protection		Equipped (automatic recove type)
Analogoutput	Voltage analog output (When alert :+5.2V)	Output range :0 to 5V Output impedance100Ω	-	Output range:0~5V Output impedance: 100Ω	-	Output range:0~5V Output impedance: 100Ω
Analogoutput	Current analog output (Ale :0mA)	Output range :4 to 20mA Load impedance :300Ω or less	-	Output range :4 to 20mA Load impedance :300Ω or less	-	Output range :4 to 20mA Load impedance :300Ω or less

Mechanical parameters
Reaction time	1.5ms/5ms/10ms can be switched
External input	NPN No contact input Valid :0V to +12V DC Input impedance: about 10 kΩ
Protective construction	IP60
Degree of fouling	2
Operating ambient temperature	-10℃~+40℃(pay attention to do not condensation, icing), storage :-20℃~+60°C
Ambient humidity	35%~85%RH, storage :35%~85%RH
Use ambient light	Incandescent lamp: the illumination degree of the illuminated suace is less than 3000lx
Service level	Below 2000m
Cable	With 0.15mm 5-core composite cable 2m
Material	Body shell: aluminum casting front cover plate: propylene base
weight	Approx. 35g(without cable), Approx. 85g(with cable)
Applicable specification	Compliance with EMC directive
(Note): When the measurement conditions are not specied, the use conditions are as follows: power supply voltage :24V DC, ambient temperature :+20℃, reaction time :10ms, analog output value of the measurement center distance. Object Object: White paper.

DIMENSION

Accessory installation diagram

WIRING DIAGRAM

Wiring diagram

DOCUMENTS & DOWNLOADS

CATALOGUE

GFL-Z series laser displacement sensor

GFL-Z Series instructions

GFL-Z series.3D-STP